The application of appearances has been made easier with enhancements to the appearance target and the addition of the appearance filter. Check the video.
Posts Tagged ‘SolidWorks 2013’
A great enhancement to PhotoView 360 2013 is the “Rounded Edge” option found in the appearance property manager. This will not only save you a lot of time but also enhance your images. Watch the video to find out more.
Last week I attended the SolidWorks 2013 Media Launch Event. While there I was able to look at the new software, find out more about the “future” of SolidWorks product offerings and catch up with some old friends. We’ll talk more about that in a bit.
Today is the day SolidWorks 2013 officially launches to the public. If you’ve been waiting to see what SolidWorks 2013 has in store you can find a variety of information in the form of web pages, videos, etc at the launch site. If you’d specifically like to see what’s new in PhotoView 360 2013 watch this blog over the next couple of weeks. I’ll be posting some what’s new videos looking at the enhancements in PhotoView 360.
Now, a bit more about the media launch event.
The present: The present talk consisted of corporate information mostly. Number of seats sold, quarterly performance, financials, etc. I tend to zone out during these discussions since I don’t have much interest in them but I did leave with with one thing in mind. SolidWorks is selling more seats of software now than it ever has and will finish 2012 with about 2 million licenses sold. This amazed me because it seemed like it was only a few years ago everyone at SolidWorks World was cheering about reaching 1 million licenses.
The near future: The near future talk was all about the SolidWorks 2013 release. The bloggers were treated to a 6 hour in-depth overview of SolidWorks 2013. There are some enhancements in there I really like. Some on the modeling side but most of the ones that really stuck out for me are PhotoView 360 related. Overall, I think almost every type of user will find something of use in the new release. The enhancements are good solid upgrades and from my usage so far with 2013 the software seems very stable. There wasn’t anything “radical” shown. No sub-D or sub-D like organic surfacing and no direct editing tools. It is disappointing not to see movement into these areas by SolidWorks but perhaps at some point in the future.
I did also expect to hear something about the SolidWorks Live Buildings product but there was no mention of it. At SolidWorks World 2012 Bertrand stated Live Buildings would be ready in 2012, the end of the year isn’t far away so if it’s going to arrive it will have to be soon. My fingers are crossed on this one. I’d really like to see what they have been working on.
The far future: The far future, if I can really call it that. Far being within the next 8-12 months holds a few different directions for SolidWorks.
- First off it was made clear that SolidWorks will be identifying new and adjacent markets. We’ve already seen some of this with the newly released SolidWorks Electrical and SolidWorks Plastics products and I think we can expect to see more of these types of products or bundles in the future.
- Second, SolidWorks is actively improving and advancing it’s core technology in V1 and will do so for years to come. There has been some speculation as to how long SolidWorks V1 would be developed or strongly developed after the new (v6) version is released. SolidWorks is still holding true to it’s past statements that V1 will remain strong for many more years.
- Third, the announcement was made that SolidWorks will have a new product ready in May of 2013. This new product will be targeted to conceptual mechanical design needs. What does that really mean? I’m not sure exactly but if I were to speculate I’d say it means this new product is based on the “V6″ technology we were shown at SolidWorks World a few years ago. For whatever reasons SolidWorks hasn’t been able to close the deal on the full blown V6 product everyone is expecting so, instead they will release a “lighter” version that essentially allows them to showcase some of the technology they are working while continuing to develop a full replacement for the V1 product.
I’ll be traveling to the DS corporate offices in Waltham this week to attend the SolidWorks 2013 media rollout. The media roll out exposes members of the press to information about SolidWorks and the soon to be released 2013 version of the software. I’ve been using the SolidWorks 2013 beta for about a month now so I have a good handle on the enhancements but it’s always nice to see and hear the official presentation. I’m also hoping SolidWorks will treat the media to a look at SolidWorks V6 or at least be able to give out some updated information.
The official SolidWorks 2013 customer launch date is September, 10 2012. The 2013 launch site will go live that day and I’m sure there will be a variety of SolidWorks 2013 information on display for users. If you’d like some sneak peeks on what to expect in SolidWorks 2013 have a look at these videos.